배관용 온도검출기

제품코드	G041070
판매 회사명	(주)신이콘텍
연락처	02-841-6616~8
홈페이지	-
제품홍보관	http://blog.yeogie.com/shinni

배관용 온도검출기 (PIPE TEMPERATURE SENSOR) SPT-100/1000

[적용 (Application)] The "SPT" Temperature sensor is intended for immersion mounting in pipes, and tanks. The immersion tube is made of stainless steel.

[기술사양 (Technical Data)] . 검출소자(Sensing Element) : Pt 100Ω/Pt 1000Ω . 검출범위(Sensing Range) : -50 ~ +300℃ . 정밀도(Accuracy) : ±(0.5+0.005*|t|℃) . 검출소요시간(Sensing Time) : About 20sec . 허용주변온도(Ambient Temp) : -30 ~ +150℃ . 허용주변습도(Ambient Humi.) : 5 ~95%Rh . 적용(For use with) : DDC. SYSTEM . 소자특성(Characteristics) : Table of Reference Values . 배선(Wire) : 2 or 3 wires, 1.0㎟ . 케이블 인입그랜드(Cable Fitting) : PF 1/2" . 무게(Well 포함)(Weight) : 150mm . 보호등급(Enclosure) : IP 54 . 카바(Cover) : Aluminum die-Cast [주의사항 (Notes)] . Select a location where water can circulate freely around the sensor pocket ensuring that the whole of the pocket is immersed in the water to be controlled. . The pocket should be plugged to prevent entry of foreign matter before sensor is fitted. For chilled water applications, Pocket should be mouted horizontally or sloping downwards towards mouth to allow condensation to drain away. . Mounting positions : When the detector has to be mounted on supply pipe, the location of the detector must be kept between 3 to 8 meters from the Heat exchanger unit. For accurate control of the temperature, follow recommendation as; - with Plate package; between 3 to 8 meters - with Shell & Tube; between 1 to 5 metersary type knob located on the front of the controller.

[결선방법 (Wiring Diagram)]

[외형치수 (Dimensions)]

※ 출처 : 여기에 기계플라자 - [G041070] 배관용 온도검출기